egress™ server hardware specifications

2 x 64-bit/66MHz PCI slots on same PCI bus (one full-height, full-length; one full-height, helf-length) OR 1 x 64-bit/66MHz (full-height, half-length) and 1 x 32-bit/33MHz (full-height, full-length) PCI slot on separate PCI buses

DIMM sockets

4 DIMM sockets on system board

DIMM capacities

266MHz DDR SDRAM memory with Error-Correcting Code (ECC) technology that includes special circuitry for testing the accuracy of data as it passes through memory

Minimum RAM

256 MB

Maximum RAM

4 GB

Diskette drive

3.5-inch, 1.44 MB diskette drive included with standard system

Controller

Dual-channel integrated Ultra3 (Ultra160) SCSI Adaptec ®   AIC-7899 (160Mb/s) controller provides one of the latest high performance SCSI technologies available without taking up PCI slots

Hard-disk drives

IDE with Hard Drive Bays foroptional 3 X 1" hot-plug SCSI drives

CD-ROM drive

24X EIDE CD-ROM

Ports

1 9-pin serial, 2 Universal Serial Bus, Video, PS/2 mouse, PS/2 keyboard, 2 RJ45, 1 server management port; Front: 1 Universal Serial Bus (USB), combined PS/2 keyboard/mouse, video

Ethernet

Dual integrated Intel Pro/1000 XT NICs to preserve valuable PCI slots. Embedded NICs support PXE and teaming functions like fail over and load balancing.

Video type

Integrated VGA-compatible, ATI-Rage XL controller

Video memory

8-MB SDRAM standard (not upgradable)

DC power supply:

Wattage

275 W

Heat dissipation

898 BTU/hr (maximum)

Cooling Fans

Four

Input voltage

100 to 120 V at 50 Hz/200 to 240 V at 60 Hz
autoranging, power factor corrected

Output voltages and maximumcurrent




Max. inrush current

+5 VDC at 13 A
+3.3 VDC at 6 A
+12 VDC at 3 A
–12 VDC at 0.2 A
+5 Vfp (volts flea power) at 1 A

Under typical line conditions and over the entire system ambient operating range, the inrush may reach 140 A for the installed power supply.

Backup battery

3-V CR2032 lithium coin cell

Rack mount:

1U

Height

4.24 cm (1.67 inches)

Width

44.7 cm (17.6 inches)

Depth

68.58 cm (27 inches)

Weight

15.88 kg (35 lb) maximum configuration

Temperature:

    Operating

10°C to 35°C (50°F to 95°F) derated 0.5°C per 1000 ft

    Non-operating

–40°C to 65°C (–40°F to 149°F)

    Maximum gradient

10°C per hour maximum rate of change

Relative humidity:

     Non-operating

5% to 95% (noncondensing) at 30°C

Maximum shock:

    Operating

six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 41 G for up to 2 ms

    Package

six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for 2 ms

Altitude:

    Operating

–16 to 3048 m (–50 to 10,000 ft)

High-potential ESD:

    Electrostatic discharge

15kV

Noise (maximum):

    Acoustic noise

< 45dbA @ 23°C ±2°C

• FCC (U.S. Only) Class A

• DOC (Canada) Class A

• CE Mark (EN 55022 Class A, EN55024, EN61000-3-2, EN61000-3-3, EN60950)

• VCCI Class A

• UL 1950

• CSA 950

• EN 60950

• IEC 60950